Showing posts with label SUP. Show all posts
Showing posts with label SUP. Show all posts

Monday, November 23, 2020

New SUP deck plug

 Our new SUP is coming along.

It is a hollow structural skin design.  The hull was molded awhile ago and now our deck plug is taking shape.

Today we gave it a glass skin.  Soon this will get gelcoat.  The gelcoat will be sanded and polished up to a gloss before molding.   



Wednesday, September 2, 2020

SUP: Molded

We molded the plug.  Made a video as well but way to long to deal with.
Here is a still photo of the completed mold prior to releasing and a photo of the mold itself.
We used black tooling gel-coat, vinyl ester resin, chopped strand mat, woven roving and glass tapes for reinforcement.


Sunday, August 23, 2020

SUP plug ready for molding

After months of shaping, sanding, refairing etc...
The plug is real to mold.
Tomorrow the weather looks like it will cooperate so we shall see.
Once we were happy with its shape, a last coat of gelcoat was sprayed on and we worked up through the grits to a wet sanded 2000 grit.
It then got the buffing compound and cleaning.
In the past I have only used wax and then PVA (polyvinyl acetate).
It has always worked well but the PVA can leave artifacts.
This time I am going to try Chemlease after applying Chemsealer.
They come recommended.
Photos of the molding will follow soon.

The glossy plug


Friday, October 11, 2019

New SUP in the works!

For a few months I have been slowly working away on a new SUP design.
The first SUP design I built was a hybrid wood strip/glass hull board.  This was back in 2011
Later I moved to all composite hollow boards of which I made 3 different evolutions.
While each variant was an improvement, our new board will be a major advance in design and awesomeness.
I have paddled a lot of boards an used this experience to drive the design of our new SUP.
It is still in the plug molding phase but is rapidly progressing.
Below are photos of the plug.  This was formed with wood strip construction overlaid with glass cloth and resin.  These steps were followed with 11 gallons of fairing compound.
We are happy with the shape to this point.  The next steps will be gelcoat layers, sanding and polishing.
The plan is to have our first board ready for spring testing.





Sunday, May 25, 2014

SUP deck mold

We stripped the mold off the plug.
This afternoon we trimmed the rough edge and sanded it as well.
The mold looks great.  We will go over it with 1500 grit paper wet then re buff to get rid of the PVA texture.
We added a stringer in the mold on the centerline, but since the profile is thin it still has some flex in it.  We will place the mold back on top of the hull mold and add a rigid frame to it.
Here are some photos of the deck mold:




Tuesday, April 22, 2014

SUP Plug: Step #8

Taking it up to a polish.
After a bout of other work, I have been able to spend some time on the plug this week.
Our goal is to make a mold of the plug before Sunday.

This will be the first of at least two molds.
To get there, we need to sand up through the grits to about 1500 grit.
Yesterday, after a little more spot filling and sanding, we achieved the uniform shape we needed.
So today we gave the plug a even sanding with 120 grit paper then 220 paper.
Tomorrow we will do 320 grit dry then 320 grit wet.
Each finer pass we will do first dry then wet.
After we get to 1500 wet, we will use buffing compound and a wool pad to bring it up to a mirror finish.


Sunday, September 23, 2012

SUP mold

On Friday we had the plug polished and ready, so we sprayed on PVA and prepared to make the mold.  To have everything organized is essential with such a big part.  We precut the variety of cloths used for the mold.  We made sure all the supplies were at hand including a fresh bucket of Vinyl Ester, latex gloves, several respirators etc.
We sprayed on a tooling gel coat Friday night and on Saturday morning we started a wet layup of the mold.  We ended using about 3 gallons of resin.
On Sunday after lunch we were able to easily free the mold and quickly declared victory.  The mold is nice and clean.  There are a couple of voids we will fill and polish in the morning.
On Tuesday we plan on forming our first part from this mold.

This photo (added Oct 7th) is of the first part pulled from the mold:



The mold just after it was popped off the plug.  Wooden shims and plastic wedges are used to prevent scratches.
The mold has some stringers embedded to add strength.  This mold should be able to produce  many parts.

The mold before washing off the pva skin.


Tuesday, September 11, 2012

Paddle Board plug fairing

Today we spent some time fairing the plug for the paddle board.  It was first formed with 1/8 inch ply. bi-axiel glass cloth and resin.  We then formed the rails with fairing compound and lots of it.
Once it got close, we gel-coated it.  Getting the plug back to a uniform color with gelcoat helps in the fairing department.  It is easier to see problems.  So today we re-faired and tomorrow it will get another gelcoat layer.  At that point we should be getting real close to polishing time.



Friday, July 27, 2012

Sea State SUP

We are building a flat water SUP.   We have had fun using some Hemel's and a few lesser brands.   But, it turns out it is less expensive to build the plug, mold and board than buying a decent SUP, so we are going into production.
Since this board will be built and sold in the midwest, we designed a board for flat-water use.  It has a longer flat mid-section, no overall rocker and just a bit of nose and tail lift.  The dimensions will be 10'10"  with a beam of 31".

St. Louis Sail and Paddle has asked me to teach a couple of boat building classes this winter.
This SUP will be built as a hull with the option of a strip built wood deck.  It can be purchased as a kit (Hull plus wood and glass for the deck) and it will be one of the choices for the boat building class.

There will be a size limit to the class of about 10 projects.  We are also looking at a small sailing dingy (the British Moth).  This boat will be offered as a kit for the St. Louis Sail and Paddle class.
If you are interested in these classes.  Please inquire about them.

(To see our current SUPs, click on the SUP's link in the menu bar.)

Thanks,
David Kreutz
314 308-3753


Swallow tail SUP

Plug molding: SUP's nose