And more fairing...

After several passes with sanding between layers of fairing, the bow was getting close.  But alas, I sanded through to the foam.  I've struck foam!  No major deal.  I scraped out the offending soft spot and filled with Bondo.

The side rails are getting close.  It is to the point were the variations are not visible to the eye.  But if  you run your hand along the rail, you can feel subtle high spots and depressions.
When we feel these areas, we mark them add a spot fairing and next will move to long board sanding.
To this point we have been using a palm sander and a course grit sanding sponge.

Sanded through to foam.

Filled cavity, ready to sand again.

Side rail.