Sea State SUP

We are building a flat water SUP.   We have had fun using some Hemel's and a few lesser brands.   But, it turns out it is less expensive to build the plug, mold and board than buying a decent SUP, so we are going into production.
Since this board will be built and sold in the midwest, we designed a board for flat-water use.  It has a longer flat mid-section, no overall rocker and just a bit of nose and tail lift.  The dimensions will be 10'10"  with a beam of 31".

St. Louis Sail and Paddle has asked me to teach a couple of boat building classes this winter.
This SUP will be built as a hull with the option of a strip built wood deck.  It can be purchased as a kit (Hull plus wood and glass for the deck) and it will be one of the choices for the boat building class.

There will be a size limit to the class of about 10 projects.  We are also looking at a small sailing dingy (the British Moth).  This boat will be offered as a kit for the St. Louis Sail and Paddle class.
If you are interested in these classes.  Please inquire about them.

(To see our current SUPs, click on the SUP's link in the menu bar.)

Thanks,
David Kreutz
314 308-3753

Swallow tail SUP

Plug molding: SUP's nose

Carbon fiber molding

We bought a few yards of plane weave carbon fiber cloth to see what all the fuss is about.
We have used carbon fiber tape in all the ferrules and throats of our blades.  It seemed to raise the breaking strength of the ferrule but we haven't gotten scientific about destructive testing yet.
But low and behold, blades made exclusively with CF are noticeably stiffer and over 2 oz lighter.
Here is the cloth we are using:

Sailing the canoe

We took the canoe out on a brief test sail with it's new sail.  The wind started out fluky then a stiff breeze kicked in before a thunderstorm arrived.  The sail performed well and the canoe scoots.
Here are some photos:

Fitting the sail

We set up the sailing canoe in the yard today to fit the sail.
The mast was built to fit the luff of this particular sail (Sailrite's Footloose kit).  The tack of the sail sits at a good height so the forward seating position is usable and comfortable without having to dive under the sail when coming about.
We new that we were going to have to get creative with the rigging for the main sheet.  Since there is no boom on this sail, there is no mid-boom sheeting which would work well.   It looks like we will place a sheave on a swivel on the stern deck and lead the sheet forward.
We will try this arrangement and see how we like it.

To finish the sail we placed #4 grommets in the corners of the sail and #1 grommets up the luff.

Sailrite sewing

Like a lot of the country we are in the middle of a heat wave.  Fortunately we still have power.  I hope the east coast gets back on line soon.  The plus for us is it is getting us to accomplish some inside tasks that have been put off.  The best item is tackling the Sailrite kit.
The sail we are sewing is for the sailing canoe.  It is a 16 foot woodstrip / epoxy boat with ikos and an outrigger.  We designed and built the boat as well as it's birdmouth wooden mast.  The rig is designed to fly a Footloose sail.  This is a sprit sail designed for the Footloose skiff.  It is an existing kit carried by Sailrite and it was the square footage we were looking for.

Sailtire is a great company.  The kits are well though out, include everything and the instructions are well written.

Today we should finish the sail.  In all, it will have taken about 6 hours to complete.  Here are some photos.  We will post more images when we raise the sail.

Fishing expedition with the River Skiff

We took out the Mississippi River Skiff on Creve Coeur lake to see how we like the skiff for fishing.  There is plenty of room and it is stable enough for two to stand and cast.
Here are some photos of the trip: